COH-TX5

Transmitter for DisplayPort, HDMI, USB, Ethernet, RS-232, Stereo Audio and IR over Fiber with SFP+ Module
SKU: COH-TX5
€2152.70

This Transmitter and Receiver set is designed for high-quality, IP routable, AV extension with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit color and multichannel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, fi eld replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used.). Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB (for KVM) and Ethernet. When combined with the optional control center or control software, the functionality of the extenders expands exponentially. Multiple Transmitters and Receivers may be combined with one or more 10Gb fi ber Ethernet switch and the units can be used together to form a distributed video matrix, a multi viewer system, or a video wall system adding to their flexibility in large event installations.

Features

  • IP switchable with minimum latency (requires optional control center/ software)
  • Ultra-light compression, lossless for most content
  • Independent breakaway A/V matrix switching (requires optional control center/software)
  • Video wall generation (requires optional control center/software)
  • Multi-view compositing (requires optional control center/software
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
  • Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional control center/software)
  • Data Transmission interfaces with 10 gigabit Ethernet via XFI, IEEE 802.3ae, compatible SFP+ fi ber modules 
  • Supports the use of an external control center or control software to provide expanded functionality (Contact your authorized dealer for more information)
Inputs 1 - HDMI, type a (socket)
1 - DisplayPort, DP 20-PIN connector (socket)
1 - audio player, Minijack connector 3.5 mm (socket)
1 - IR, 3.5 mm minijack connector (socket)
Outputs 1 - slot for the SFP + module
1 - audio player, Minijack connector 3.5 mm (socket)
Ports 1 - USB, type B (socket)
1 - Ethernet, RJ45 connector (socket)
1 - RS-232, D-Sub De9 connector (socket)
Maximum Resolution 4K, 60 Hz
Bandwidth 600 MHz
Bandwidth 18 Gb / s (6 Gb / s per channel)
Cable for the organization of the transmission line Multimode or single-mode fiber optic patch (depends on the installed SFP module)
Fiber optic extension up to 30000 m - SMF
up to 550 m - mmf om4
Maximum HDMI Line Length 10 m - 1080p / 60 (12 bits)
5 m - 4k / 60 (4: 4: 4, 8 bits)
IR carrier frequency 30-50 kHz (30-60 kHz in ideal conditions)
Serial interface baud rate Up to 115200 bits / s
ESD Protection ± 8 kV (air discharge), ± 4 kV (contact discharge)
Housing material metal
Case color black
Operating temperature range 0…+40 °C
Storage temperature range −20…+60 °C
Relative humidity 20 ... 90  % (without condensation)
Power 12 V, 3 A
Power consumption 12 W
Size (WxDxH) 215 x 153 x 47 mm
Weight 0,97 kg
Interface extension receivers
  • COH-RX5

    Receiver for HDMI 2.0, USB, Ethernet, RS-232, Stereo Audio and Bidirectional IR from Fiber with SFP+ Module
Equipment controllers
  • CDPS-CS7

    Cypress IP Transmitter/Receiver Controller, Master Room Controller
Recently viewed products