AIP-D4101

4x1 Analog Audio to Dante Transcoder with Phantom Power
SKU: AIP-D4101
€479.19

These Transmitter and Receiver are with Dante Technology. They are easy to use. Because with Dante technology, it is obviously easier and more flexible than physically wiring. Dante does away with bundles of heavy expensive analog or multi-cores cables, replacing it with low cost easy available CAT 5e, CAT 6 cables. Super-standard good sound quality is another benefit of Dante. Because it is a digital transmission method, you do not need to worry about interference and crosstalk, and worry about signal attenuation caused by constant distance transmission. These units provide flexibility for installation. Equipped with four audio inputs/outputs and one LAN port, they could transfer audio and route them easily with 3rd party units via the Dante network. On the ADC, adjustable phantom power from +0V to +48V for each port supports for microphones, and auxiliaries.

Features

  • Adjustable phantom power from +0V to +48V
  • Easily route audio with 3rd party units in the Dante network
  • May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
Inputs 4 - Balanced audiomono, terminal block
Outputs 1 - Dante, RJ45 connector (socket)
Ports 1 - USB (service), type Micro-B (socket)
Analog input audio formats Balance connection
Impedance 42.3 com
Maximum level 4 in RMS
Signal to Noise Ratio > 87 dB (1 kHz, 0 DBFS)
Dante Bandwidth 100 Mbps
Serial interface baud rate 19200 bits / s
ESD Protection ± 8 kV (air discharge), ± 4 kV (contact discharge)
Housing material aluminum
Case color black
Operating temperature range 0…+40 °C
Storage temperature range −20…+60 °C
Relative humidity 20 ... 90  % (without condensation)
Power PoE
Power consumption 6 W
Size (WxDxH) 128 x 108 x 25 mm
Weight 0,351 kg
Signal format converters

AIP-D1401

Cypress Technology
1x4 Dante to Analog Audio Transcoder
SKU: AIP-D1401
Price, pcs €479.19
Recently viewed products