Brand: Kramer
Length:
Color:
Przez telefon

BC-UNIKat/LSHF

  • Quality Construction — 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket.
  • Optimized for Kramer Hardware
  • HDBaseT Recommended — www.hdbaset.org/hdbaset–recommended–cables/.
  • Reaction to Fire Classification — Dca–s2,d1,a1 (optional: B2ca–s1,d1,a1).
  • RJ–45 Connector — The larger diameter 23AWG twisted pair cable requires a special RJ–45 connector.
  • Length — Available in reel boxes of 100m (328ft) & wooden drums of 305/500m (1000/1640ft).
Twisted pair category CAT6A U/FTP
Number of conductors 4 x 2
Inner conductor 1 x 0,56 mm
Conductor material Annealed Copper
Conductor cross section 0.25 mm²
AWG 23
Insulation material Polyethylene film-porous film high density (Skin-Foam-Skin HDPE)
Insulation diameter 1,33 mm ±0,1 mm
Insulation color orange, orange with white
green, blue with white
blue, green with white
brown, brown with white
Screen common No
Screen individual Aluminum foil at Mailare (Al-Mylar)
Ground wire 0.4 mm ± 0.1 mm; 90  % tinned copper
Outer shell material Low-house polymer without halogen (LSHF)
Outer shell diameter 7,2 mm ±0,2 mm
Outer shell thickness ≥ 0,5 mm
Outer shell color Blue
Electrical parameters  
Wave impedance 100 ohms ± 15 ohm
DC conductor resistance per 1 km 79.8 Ohm Max.
Ohmic asymmetry < 1,5 %
Signal Propagation Rate (VOP) 0,76
Working pair capacity (electrical) ≤ 42 PF / M
Capacitive asymmetry of the pair relative to the "ground" ≤ 1500 PF / km
Propagation delay mismatch at 100 m 10 ns.
Dielectric strength 2.5 kV post. (2 s)
Insulation resistance per 1 km > 5 &​​nbsp; gom
Rated voltage 30 V
Performance characteristics
Maximum pulling tension 100 N.
Minimum bend radius 60 mm when mounting
50 mm during operation
Operating temperature range −20…+60 °C
Storage temperature range 0…+50 °C
Temperature range during installation 0…+50 °C
Compliance
Flame Propagation Test IEC 60332-1
Smoke Density Test IEC 61034
Halogen Acid Gas Emission Test IEC 60754
Cable standards ANSI TIA/EIA-568-C.2:2009, IEC 61156-5:2012 (Ed. 2.1), EN 50173-1:2011, EN 50173-2:2007 (adjusted A1:2010), EN 50288-10-1:2012, ISO/IEC 11801:2011 (Ed. 2.2)
Ostatnio oglądane produkty