CH-U331HTXWPUD UHD HDMI/AV over IP Transmitter with USB/KVM (2 Gang US)

The AVoIP wall plate transmitter forms a part of a 4K UHD multi-function extension system that is able to extend HDMI or VGA signals along with analog audio, USB 2.0, IR and serial data using the TCP/IP protocol over regular Gigabit Ethernet networks. When using standard Ethernet cables, this system supports the extension of AVoIP signals up to 100 meters and the extension distance can be further extended by using gigabit network switches. This allows the user to cascade the system without signal loss or introducing delay. The USB functionality allows the system to act like a remote USB hub which provides a flexible remote KVM platform. When the extension system’s units are in multicast mode, a single AV signal can be sent to a large number of receivers within the same local network without the additional receivers increasing the bandwidth requirements. Additionally, that same multicast signal can be used to create large multidisplay video walls with amazing simplicity. When combined with the optional IP Master Controller the functionality of the system expands exponentially. Its centralized web-based interface greatly simplifies control and management of large distributed video matrix or video wall systems adding to their flexibility in large home or commercial installations. Configuration information is provided via On Screen Display (OSD) and control is by WebGUI, Telnet, and front panel controls.

Features

• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 & 2.2 compliant
• 1×HDMI input & 1×VGA input
• Video, audio and control transmission over TCP/IP in Unicast (point-topoint) or Multicast (single-to-many) modes
• Multi-monitor video wall support with 180° and 270° rotation options
• HDMI input resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) or 4K@30Hz (YUV 4:4:4, 8-bit)Note: 4K@50/60Hz (YUV 4:2:0) sources are automatically converted to 4K@25/30Hz (RGB) for output
• VGA input resolutions up to WUXGA (RB)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, and Bitstream over HDMI
• The analog Line In audio can be automatically embedded into the transmitted signal for output on connected receivers via HDMI and their analog Line Out ports
• The Mic In on a connected receiver will send audio directly to the analog Line Out on this transmitter
• Powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
• Supports USB keyboard, mouse and storage extension
• Supports IR and RS-232 bypass
• Unit can be controlled via WebGUI, Telnet, and front panel controls
• Supports the use of an external control center (IP Master Controller) to provide expanded functionality