iSwitch 501HD 4K60 5x1 Presentation Switcher HDMI and USB C IN, HDMI and HDBaseT OUT, with Dante.

5x1 seamless presentation switch features 3 HDMI inputs, 2 USB-C inputs (DP Alt mode USB 2.0, 100M Ethernet and 60W charging), 1 HDMI output and 1 HDBT mirrored output. HDBT supports standard PoE power supply and can extend uncompressed signal up to a distance of 230ft/70m (4K@30Hz 4:4:4) or 131ft/40m (4K@60Hz 4:4:4) via a single CAT6A (F/FTP) cable. This 5x1 seamless presentation switch output supports single full screen or various multiview display modes (Single/PIP/PBP/Triple/Quad). This product supports USB 2.0 local KVM switching and local Hub/HDBT USB pass-through function (from TX to RX). It also supports bi-directional RS-232 and IR control signal pass-through function. This presentation switch is featured with 1 analog audio input, 1 analog audio output, and Dante 2x2 audio input and output. It built-in 3x3 audio matrix with independent audio EQ/ volume/delay adjustment.

Features
  • iSwitch 501HD
  • HDMI 2.0b, HDCP 2.2 and DP 1.2 compliant
  • Support 18Gbps video bandwidth
  • Support video resolution up to 4K@60Hz 4:4:4
  • Uncompressed 4K60 over HDBT 3.0 up to 132ft/40m via single CAT6A (F/FTP) cable
  • Uncompressed 1080P&4K30 over HDBT 3.0 up to 230ft/70m via single CAT6A (F/FTP) cable
  • Up to 5 categories of multiview display modes: Single/PIP/PBP/Triple/Quad
  • Support 5x1 seamless switching (single screen) and fast switching (multiview) function
  • Input: 2x USB-C, 3x HDMI, 1x Analog audio, 1x Dante 2ch
  • Output: 1x HDMI and 1x HDBT mirrored, 1x Analog audio, 1x Dante 2ch
  • HDMI and HDBaseT (PoE) outputs (Mirrored)
  • Dante 2x2 audio input and output
  • USB-C supports DisplayPort Alt mode for A/V, USB 2.0, 100M Ethernet and 60W charging
  • Local USB 2.0 KVM switching and extending USB 2.0 over HDBT 3.0
  • Signal input supports manual switching and automatic switching modes
  • Support analog/Dante audio embedding, analog/Dante audio de-embedding output
  • CEC/RS-232 control external devices ON/OFF
  • Advanced EDID management
  • Flexible control via front panel buttons, IR remote, RS-232, TCP/IP or Web GUI
  • Support standard PoE power supply (TX_PSE, RX_PD)
Brand:
Infobit
Product Type:
Presentation Switcher
Specifications
Maximum Operating Temperature:
40°C
Colour:
Black
Control Port Type:
1xRS-232 (3-pin 3.81mm Phoenix Connector), 1xLAN RJ-45, 2xUSB Type-B, 4xUSB Type-A, 2xIR IN (3.5mm Stereo Mini-Jack), 2xIR Out (3.5mm Stereo Mini-Jack)
Special Features:
Multi-View Display Mode, Dante 2x2 Audio Input and Output, EDID Management, Flexible Control
IR Frequency:
20 to 20kHz
Power Rating:
150W
Humidity:
20 to 90%
Minimum Operating Temperature:
0°C
Includes:
1x5x1 Seamless Presentation Switch, 1xHDBaseT Receiver, 1xIR Blaster Cable (1.5 meters), 1xIR Wideband Receiver Cable (1.5 meters), 2x3-pin 3.5mm Phoenix Connector (Male), 3x5-pin 3.5mm Phoenix Connector (Male), 4xMounting Ear, 8xMachine Screw, 1x24V/8A D
Performance
Resolution:
80i to 1080p@50/60Hz, 4K2K@24/30Hz, 4K2K@50Hz/60Hz (4:4:4), 3840x2160p@60Hz, 3840x2160p@50Hz, 4096x2160p@60Hz, 4096x2160p@50Hz, 3840x2160p@30Hz, 3840x2160p@25Hz, 1920x1200p@60Hz, 1920x1080p@60Hz, 1920x1080p@50Hz, 1360x768p@60Hz,1280x800p@60Hz, 1280x720p@6
Video Bandwidth:
18Gbps
Baud Rate:
115200bps
Inputs and Ports
Input Port Type:
2xUSB Type-C, 4xHDMI Type-A (19-pin Female), 1x5-Pin Phoenix Connector, 1xDANTE, 1xHDBaseT
Output Port Type:
2x HDMI Type-A (19-pin Female), 1xHDBT, 2x5-pin Phoenix Connector
Number of Ports:
28
Power
Current Rating:
8A
ESD Protection Rating:
±8kV (Air-Gap Discharge), ±4KV (Contact Discharge)
Dimensions
Length:
22cm (Transmitter), 14cm (Receiver)
Width:
15cm (Transmitter), 10.5cm (Receiver)
Height:
4.4cm (Transmitter), 2.1cm (Receive)
Weight:
1.21g (Transmitter), 424g (Receiver)
Other
Voltage Rating:
24V DC (Output), 100 to 260V AC (Input)

iSwitch 501HD 1 (iSwitch-501HD-User-Manual_V1.0.pdf, 1,513 Kb) [Download]

No reviews found

  • Recently Viewed
  • New Arrivals